Page 1
SID 8-A22 Original-Bedienungsanleitung Original operating instructions Mode d'emploi original Istruzioni originali Manual de instrucciones original Manual de instruções original Oorspronkelijke handleiding Original brugsanvisning Originalbruksanvisning Original bruksanvisning Alkuperäiset ohjeet Eredeti használati utasítás Oryginalna instrukcja obsługi Originální návod k obsluze Pôvodný názov na používanie Originalna navodila za uporabo Orijinal kullanım kılavuzu...
Page 6
▶ The type designation and serial number can be found on the type identification plate on the tool. Make a note of this data in the following table and always refer to it when making an enquiry to your Hilti representative or Hilti Service Center.
Page 7
CAUTION Draws attention to a potentially dangerous situation that could lead to slight personal injury or damage to the equipment or other property. 2.2 Safety instructions The safety rules given in the following section contain all general safety rules for electric tools which, in accordance with the applicable standards, require to be listed in the operating instructions.
Page 8
Accordingly, use a suitable vacuum cleaner of the type recommended by Hilti for wood dust and/or mineral dust and which is designed for use with this power tool. Observe national regulations applicable to the materials you intend to work with.
Page 9
▶ Observe the national health and safety requirements. ▶ To reduce the risk of injury, use only genuine Hilti tools and accessories. ▶ To power the impact screwdriver, use a rechargeable battery of a type approved by Hilti and a charger from the C4/36 series.
Page 10
Impact screwdriver, operating instructions. Note Approved accessories and consumables can be found at your Hilti Center or at www.hilti.com. 3.4 Liion battery display When the Li-ion battery is in use, the charge status can be displayed by tapping one of the battery release buttons.
Page 11
4.2.2 Total vibration (vector sum of three directions), measured in accordance with EN 60745 Vibration emission value when tightening bolts and nuts of the maxi- 13.5 m/s² mum permitted size (a Uncertainty (K) 1.5 m/s² 4.3 Battery B 22/1.6 LiIon B 22/2.6 LiIon B 22/3.3 Li-Ion (02)
If the fault you are experiencing is not listed or the recommended action to be taken does not successfully solve the problem, please remove the battery and return the power tool to Hilti Service. Printed: 20.05.2015 | Doc-Nr: PUB / 5230117 / 000 / 00...
Page 13
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back old tools or appliances for recycling. Ask Hilti Customer Service or your Hilti representative for further information.
Page 14
9494 Schaan Liechtenstein We declare, on our sole responsibility, that this product complies with the following directives and standards. Designation Impact screwdriver Type designation SID 8-A22 Generation Year of design 2014 Applicable directives: • 2004/108/EC (up to April 19, 2016) •...
Need help?
Do you have a question about the SID 8-A22 and is the answer not in the manual?
Questions and answers