Operation - Hilti SIW 22T-A 1/2 Operator's Manual

3/4" square drive with through hole
@
Forward / reverse selector switch with
;
safety lock
Control switch
=
Light to illuminate the work area
%
3.2 Intended use
The product described is a hand-held cordless impact screwdriver. It is designed for tightening and releasing
nuts, bolts, anchors and wood screws.
The impact screwdriver may be used only for applications that do not require a precise/specified torque.
Failure to observe this point presents a risk of over-tightening and damage to the bolt, screw or workpiece.
▶ Use this product only with Hilti Li­ion batteries of the B18 / B22 series.
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.
3.3 Items supplied
Impact screwdriver/wrench, operating instructions.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by us for use with the product can be found at your
local Hilti Center or online at: www.hilti.com
4 Technical data
4.1 Technical data
Rated voltage
Weight in accordance with EPTA procedure 01/2003
Rated speed under no load
Rated voltage
Weight in accordance with EPTA procedure 01/2003
Rated speed under no load

5 Operation

5.1 Fitting the belt hook (optional)
WARNING
Risk of injury! Hazard presented by a falling power tool.
▶ A falling power tool may present a risk of injury to yourself and others. Check that the belt hook is
fitted securely before beginning work.
Note
The belt hook allows the power tool to be attached to a belt worn by the operator. The belt hook can
be fitted to allow attachment on the left or right side of the body.
8
Printed: 27.07.2016 | Doc-Nr: PUB / 5293233 / 000 / 00
Belt hook (optional)
&
Battery
(
State of charge and fault display (Li-ion
)
battery)
Release button with additional function
+
(state of charge display activation)
SIW 22T­A
21.6 V
3.2 kg
(7.1 lb)
0 /min ...2,000 /min
SIW 22T­A
21.6 V
3 kg
(7 lb)
0 /min ...2,000 /min
/
1
2
/
3
4