Hilti SID 22-A Manual page 16

▶ Set the forward/reverse switch to the desired direction of rotation.
5.9 Screwdriving
WARNING
Risk of injury and damage. Screws/bolts or the workpiece may be damaged by excessively high
torque; this may also lead to serious injury.
▶ Ensure that the fastener and attachment will withstand the level of torque generated by the tool.
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Use the torque selector button to set the desired torque. → page 13
5.10 Switching on
▶ Press the control switch.
◁ Speed of rotation is regulated by the distance the control switch is pressed in.
5.11 Switching off
▶ Release the control switch.
5.12 Removing the battery
▶ Remove the battery.
14
Printed: 27.07.2016 | Doc-Nr: PUB / 5293001 / 000 / 00