Viewing Or Clearing The Local Event Log - Raritan PX3TS User Manual

Chapter 6: Using the Web Interface
332

Viewing or Clearing the Local Event Log

By default, the PX3TS captures certain system events and saves them in
a local (internal) event log.
You can view over 2000 historical events that occurred on the PX3TS in
the local event log. When the log size exceeds 256KB, each new entry
overwrites the oldest one.
To display the local log:
1. Choose Maintenance > Event Log.
Each event entry consists of:
ID number of the event

Date and time of the event

Event type

A description of the event

2. To view a specific type of events only, select the desired event type in
the Filter Event Class field.
To refresh the data, press F5 as needed.

3. To go to other pages of the log, click the pagination bar at the bottom
of the page.
If there are more than 5 pages and the page numbers displayed

in the bar does not show the desired one, click
show the next or previous five page numbers, if available.
4. If wanted, you can resort the list by clicking the desired column
Sorting a List
header. See
To clear the local log:
1. Click on the top-right corner.
2. Click Clear Log on the confirmation message.
(on page 108).
to have it