Viewing Or Clearing The Local Event Log - Raritan PX3TS User Manual

Chapter 6: Using the Web Interface
412

Viewing or Clearing the Local Event Log

By default, the PX3TS captures certain system events and saves them in
a local (internal) event log.
You can view over 2000 historical events that occurred on the PX3TS in
the local event log. When the log size exceeds 256KB, each new entry
overwrites the oldest one.
To display the local log:
1. Choose Maintenance > Event Log.
Each event entry consists of:

ID number of the event

Date and time of the event
Tip: The date and time shown on the PX3TS web interface are
automatically converted to your computer's time zone. To avoid any
time confusion, you can apply the same time zone settings as those
of PX3TS to your computer.

Event type

A description of the event
2. To view a specific type of events only, select the desired event type in
the Filter Event Class field.
3. The event log is refreshed in real time whenever new events occur.
To avoid any interruption during data browsing, you can suspend the
real-time update by clicking

To restore real-time update, click
events that have not been listed yet due to suspension will be
displayed in the log now.
4. To go to other pages of the log, click the pagination bar at the bottom
of the page.

When there are more than 5 pages and the page numbers listed
does not show the desired one, click
show the next or previous five page numbers, if available.
.
. Those
to have the bar