View Dominion Kx Event Log (Status); Power Control; Figure 45 Dominion Kx Status Window - Raritan DOMINION KX User Manual

50 D KX U M
OMINION SER ANUAL

View Dominion KX Event Log (Status)

On the Setup menu, click Status to view the Dominion KX Event Log. The Dominion KX Status window
appears, displaying events by date and time. Click [Export] and browse for a location to save the displayed
log file to a text file. Click [Copy Log] to copy the display to your clipboard.

Figure 45 Dominion KX Status Window

Power Control

The Dominion KX supports up to four power strips. Users may group or assign up to four ports to any of
the Dominion channels. Once assigned, the power management function will be available in RRC.
Setup Preparation
You will need a power strip and the P2CIM-PWR Computer Interface Module (CIM). The CIM is included
with the power strip shipment; however, if you need a replacement CIM, you can purchase a P2CIM-PWR
from Raritan Computer, Inc. or an authorized Raritan reseller.
Connecting the Power Strip
1. Connect the male RJ-45 of the P2CIM-PWR to the female RJ-45 connector on the power strip.
2. Connect the female RJ-45 connector of the P2CIM-PWR to any of the available female system port
connectors on the Dominion KX using a straight through Cat 5 cable.
3. Power ON the power strip.
4. Power ON the Dominion KX unit.