Program Edit Mode; About Program Edit Mode; Differences Between Regular And Advanced User Type - Kurzweil FORTE SE Musician's Manual

Chapter 7

Program Edit Mode

This chapter will help familiarize you with the features of Program Edit Mode.

About Program Edit Mode

NOTE: Before you read this chapter, be sure to read
description of Programs.
Program Edit Mode allows you to edit and customize Programs. Any Program can be edited
in Program Edit Mode and saved to one of the 1024 User locations.
To enter Program Edit Mode, first press the Program Mode button to enter Program Mode,
then press the EDIT button at the bottom left of the display.
Once you are in Program Edit Mode, press the soft buttons at the bottom of the screen to
navigate to each of the Program Edit Mode pages. See the following sections for details on
navigating and changing parameters. All parameters apply only to the currently selected
Program.
Differences Between Regular and Advanced User
Type
When the Global Mode User Type parameter is set to Regular, you can access a Program's
parameter controller assignments, effects, arpeggiator, and common settings. When the
Global Mode User Type parameter is set to Advanced, you can access the Regular User Type
pages as well as additional VAST or KB3 pages. The User Type parameter can be selected in
Global Mode on the Global Main page (see
Note: This chapter describes how Program Edit Mode works when the Global
Mode User Type parameter is set to Advanced. Program Edit Mode works the
same way when the Global Mode User Type parameter is set to Regular, except
that fewer pages are shown, and some settings will be hidden when scrolling
through Arpeggiator settings.
About Program Edit Mode
Ch. 6 Program Mode
User Type on page 12-3
Program Edit Mode
for a full
for details).
7-1