Kurzweil FORTE SE Musician's Manual page 299

Controllers
With Controllers set to Off, all controllers are ignored during recording/playback. With
Controllers set to On, controller data only of the specified controller and only within the specified
value range are recorded/played.
Controller
The Controller parameter determines which controller(s) is/are recorded/played back when
Controllers is set to On.
LoVal and Hi
LoVal determines the lowest value for the specified controller that is recorded/played back when
Controllers is set to On. The Hi to the right of LoVal determines the highest value for that
specified controller that is recorded/played back when Controllers is set to On.
PitchBend
This parameter enables/disables pitch bend events to be recorded/played back.
ProgChange
This parameter enables/disables program changes to be recorded/played back—this includes
Controllers 0 and 32 (bank change).
MonoPress
This parameter enables/disables monophonic key pressure events to be recorded/played back.
PolyPress
This parameter enables/disables polyphonic key pressure events to be recorded/played back.
TempoChng
This parameter enables/disables tempo change events to be recorded/played back.
The Rec, Play, and Stop Soft Buttons
These soft buttons function as described in
The Done Soft Button
If no changes were made in the RECFLT/PLYFLT page, pressing the Done soft button calls up
the MAIN page. If changes were made, pressing the Done soft button calls up the "Save
Changes" dialog.
Song Mode and the Song Editor
Song Mode: The METRONOME Page
"The Rec, Play, and Stop Soft Buttons" on page 13-12.
13-15