Navigation - Kurzweil FORTE SE Musician's Manual

Features of the Forte SE

Navigation

Global Button
Pressing the Global button enters Global Mode (described in further detail, in
Global
of the Forte SE. These parameters include tuning, transposition, velocity and pressure
(aftertouch) sensitivity. Additionally, you can save or load user Programs and Multis to and
from a computer connected to the Forte SE via USB as well as perform a Reset. This button's
LED is illuminated when you are in Global Mode.
CAUTION: Performing a Reset will erase ALL User Program and User
Multis, and will reset Global settings to a factory state.
Navigation
The navigation section of the Forte SE front panel includes the LCD display, Previous- &
Next+ buttons, Channel/Layer/Zone buttons, and the Alpha Wheel.
The LCD Display
The top line of the display always shows the name current Mode and/or page. The bottom
line of the display shows the names of any available Soft Buttons for the current page.
On the Program and Multi Mode main pages, the top line of the display shows the MIDI
transposition, and Program Mode also shows the current MIDI channel. The middle of the
display shows the currently selected Program/Multi ID and name, as well as the name of
assignment for the last moved controller. Press the View soft button to switch between Large
view and List view.
In other modes the display will change depending on the available parameter for the current
mode and page.
3-10
Mode). In Global Mode, you can edit parameters that control the overall behavior
Ch. 12