The Dsp Modulation (Dspmod) Page - Kurzweil FORTE SE Musician's Manual

Each field in the left-hand column of the page is a function-parameter of the current layer's
algorithm. You can coarsely adjust the function-parameter in these left-hand fields—as noted
in Common DSP Control Parameters on page
parameters on the DSPCTL page are reflected in the corresponding function-parameters
on the DSPMOD page. The right-hand side of the DSPCTL page is the subpage of the
highlighted function-parameter—on the subpage are the fine adjust parameters and hard-
wired parameters. To access the parameters on the subpage, highlight the function-parameter
you wish to edit, and then press the > button to move the cursor into the subpage. The label
of a function-parameter depends on its corresponding function-block in the current layer's
algorithm. The above DSPCTL page corresponds to the following algorithm:

The DSP Modulation (DSPMOD) Page

Before reading further, be sure to read
Control Parameters on page
Press the DSPMOD soft button to call up the DSP Modulation (DSPMOD) page, which is
displayed below:
7-33.
Parameter
Source 1
Depth
Source 2
Depth Control
Minimum Depth
Maximum Depth
The DSP Modulation (DSPMOD) Page
7-33, any adjustments made to the function-
Algorithm Basics on page 7-32
Range of Values
Control Source List
(Depends on Function)
Control Source List
Control Source List
(Depends on Function)
(Depends on Function)
Program Edit Mode
and Common DSP
Default
Off
0
Off
Off
0
0
7-39