Changing The Transmit Midi Channel; Panic - Kurzweil FORTE SE Musician's Manual

Changing the Transmit MIDI Channel

The current MIDI Transmit channel is shown on the right side of the top line of the display.
A different Program can be selected for each MIDI Channel. All channels can be triggered
simultaneously from an external MIDI sequencer or computer. The Aux FX Chains of the
Program on the currently selected MIDI Channel are used for Programs on all Channels.
Press the Channel/Layer/Zone ( ▲ or ▼) buttons to change the MIDI Transmit channel
Pressing both ▲ and ▼ at the same time will reset the current MIDI Transmit channel to 1.

Panic

Pressing the 15 and 16 Program/Multi buttons simultaneously deactivates all sounding
notes and resets controller values by sending an "All Notes Off " message and a "Reset All
Controllers" message on all 16 MIDI channels.
Program Mode
Panic
6-17