Kurzweil FORTE SE Musician's Manual page 241

Controller Controller
Number Destination
153 ArpLimit
154 ArpLmtOp
155 ArpVel
156 Arp Dur
157 Latch
158 Latch2:
159 ArpGliss
160 SusLatch
161 Panic
162 SoloZn
168 TapTempo
170 -Arp Shift
171 ShiftPatt
172 ShiftPBank
173 VelPatt
174 VelPBank
175 VelFixed
176 ShKeyNum
177 ShiftKey
178 ShKeyNuV
180 Chan Intonation
181 Chan Int Key
The 60 Arpeggiator Shift Limit steps are scaled over the 128 MIDI controller values,
so that 0 = 0 steps and 127 = 60 steps. (See
Arpeggiator Shift Limit Option, each range of values selects one of seven options in
order of parameters list: 0-18, 19-36, 37-54, 55-72, 73-90, 91-108, 109-127. (See
LimitOpt (Limit Option) on page
Arpeggiator Velocity Mode, each range of values selects one of twenty-three
options in order of parameters list: 0-5, 6-10, 11-15...101-105, 106-110, 111-127.
(See
Velocity Mode on page 7-64).
The Arpeggiator Duration % values are scaled over the 128 MIDI controller values,
so that 0 = 1% and 127 = 100%. (See
To control the Arpeggiator Latch switch, 0-63 = off, 64-127 = on. (See
7-58)
To control the Arpeggiator Latch2 switch, 0-63 = off, 64-127 = on.
Arpeggiator Gliss, 0-63 = off, 64-127 = on. When Arp Gliss is On, the Arpeggia-
tor plays chromatically between inputted notes, and ignores the Arpeggiator Shift
Amount, Shift Limit, and Limit Option parameters.
For Arpeggiator Latch Pedals mode, 0-63 = off, 64-127 = on.
Sends an "all notes off" message and an "reset all controllers" message on all 16
MIDI channels.
Solo Zone - Values above 64 will solo the zone that sends values to this destination,
values below or equal to 64 will unsolo the zone. While a Zone is soloed, pressing
another Zone button will make that Zone the soloed zone. Pressing a soloed zone
button again will cancel solo mode. To return to Solo mode the original controller
assigned to Solo Zone (162) will need to be re-engaged.
Assign this to a switch to control the tap tempo function, then tap the switch in time
to set the Multi tempo.
Sets ARPEGGIATOR values for Shift to negative. 0-63 = off, 64-127 = on. (See
Shift (Shift Amount) on page 7-62)
Selects one of the 128 patterns in the current ARPEGGIATOR ShiftPatt Bank. (See
Shift Pattern (ShiftPatt) on page 7-62)
A controller value selects the corresponding ShiftPatt Bank for the ARPEGGIATOR
page of a controller's zone. For example, controller value 2 selects ShiftPatt bank 2,
controller value 7 selects ShiftPatt bank 7.
Selects one of the 128 patterns in the current ARPEGGIATOR VelPatt Bank. (See
VelocityPat on page 7-66)
A controller value selects the corresponding VelPatt Bank for the ARPEGGIATOR
page of a controller's zone. For example, controller value 2 selects VelPatt bank 2,
controller value 7 selects VelPatt bank 7.
Set's arpeggiator velocity when ARPEGGIATOR Velocity Mode is set to Fixed. (see
Velocity Mode on page 7-64)
Shift Key Number (see below)
Shift Key (see below)
Same as 176 ShKeyNum, but the Shift Pattern's velocity will be modified by the
current velocity pattern of the zone.
Selects the Intonation Map (IDs 0-127) in a MIDI channel in real time.
Selects the Intonation Key (C through B) in a MIDI channel in real time.
The Controller Destination List
Description
ShiftLimit on page
7-59)
Duration on page 7-67)
Multi Edit Mode
7-61)
Latch on page
11-23