Multi Edit Mode; About Multi Edit Mode - Kurzweil FORTE SE Musician's Manual

Chapter 11

Multi Edit Mode

About Multi Edit Mode

NOTE : Before you read this chapter, be sure to read
description of Multis.
Multi Edit Mode allows you to edit and create Multis and gives you access to a Multi's
Common parameters and Zone specific parameters. Multis are configurations of up to eight
Zones, each of which may have its own Program, controller assignments, and MIDI transmit
channel. A Zone can also be configured to control an external sound module or computer
software through a MIDI or USB cable.
In Multi Edit Mode, you can customize the Program, controller assignments, and MIDI
transmit channel of the Zones in a Multi, in addition to many other parameters. Any Multi
can be edited in Multi Edit Mode and saved to one of the 1024 User IDs.
To enter Multi Edit Mode, first press the Multi Mode button to enter Multi Mode, and then
press the EDIT button.
Once you are in Multi Edit Mode, press the soft buttons at the bottom of the screen
to navigate to each of the Multi Edit Mode pages. See the sections below for details on
navigating and changing parameters and Zones. All parameters apply only to the currently
selected Zone, except for parameters on the Common Page and certain controller parameters,
which apply to all Zones. On the Multi CCs and Multi Switches pages, if a parameter is
selected which applies to all Zones, "All Zones" will be displayed in the top right corner of
the display.
About Multi Edit Mode
Ch. 10 Multi Mode for a full
Multi Edit Mode
11-1