Kurzweil FORTE SE Musician's Manual page 216

Multi Mode
The ARP Function
Changing ID Numbers
The display shows the first available ID number and the current Multi name. You can save
Multis with ID numbers from 1025 to 2048. If you are saving a Multi that has not been
previously edited, the next available unused ID number will be selected. If you are saving
a previously edited User Multi, the ID number that the Multi was last saved with will be
selected. Press the Value Jump double button press (Previous-/Next+) to toggle between
selecting the ID number that the Multi was last saved with, and the next available unused
ID number.
To change the ID number, turn the Alpha Wheel or use the Previous-/Next+ buttons to
select the new ID number. To organize Multis by Category, press a Category button to select
the first ID of the Category, then press the Program/Multi 1-16 buttons to select an ID
in the selected Category. If the Global Mode Sound Sel parameter is set to "ID number",
the Program/Multi 1-16 buttons will instead allow you to select any user ID by typing
the number followed by pressing the Enter button. If you select a previously used ID# the
display will show a prompt to allow you to decide whether to replace it.
Naming a User Multi
To rename the Multi, first press the Rename soft button. The display then shows the current
Multi name. Multi names can total 16 characters in length.
10-14