Kb3 Editor: The Keyclick Page - Kurzweil FORTE SE Musician's Manual

Program Edit Mode

KB3 Editor: The KEYCLICK Page

KB3 Editor: The KEYCLICK Page
The Key Click feature adds a decaying burst of pitched noise to the attack of notes. Unlike
the percussion, the key click is "multi-triggered," which means that every new note will
trigger it. The parameters on this page primarily control the decay, volume, and pitch of the
key click.
KeyClick
This is where you turn Key Click on or off. With KeyClick set to Off, you may still hear a
click depending on your Note Attack and Note Release settings (see below).
Volume
This parameter sets the level of the keyclick; the noise decays from the level you set here. This
level is scaled by the drawbar levels, as well as the expression pedal level.
7-90
Parameter
Key Click
Volume
Decay
VelTrk
Pitch
Random
Retrig Thresh
Note Attack
Note Release
Key Track Amount (KTrkAmt)
Key
Range of Values
Off, On
-96.0 to 0.0 dB, in 0.5-dB increments
0.005 to 1.280 seconds, in 0.005-second increments
0 to 100%
1 to 120
0 to 100%
-96.0 to 0.0 dB, in 0.5-dB increments
Normal, Hard, PercHard
Normal, Hard
0% to -10%
C -1 to G9