The Receive Page - Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910330 CHAP 10 Manual

The RECEIVE Page

Press RECV to select the RECEIVE page, where you deÞne the K2600Õs response to incoming
MIDI signals (with one exception pertaining to Quick Access mode, which weÕll explain later).
MIDIMode:RECEIVE||||||||||||||||||||||||
BasicChannel: 1|||||||| |SysExID:|||0|||||
MIDI|Mode|||:Multi|||||SCSI|ID:|||6|||||
AllNotesOff|:Normal||||BendSmooth:On||||
ProgChgType|:Extended||LocalKbdCh:None||
VelocityMap:|1|Linear||BankSelect:Ctl|32
Pressu r eMap:| 1 |Linea r ||Powe r Mode|: U ser||
XMIT|| | RECV|| | CHANLS | PrgChg | RsetCh |Panic
Parameter
Basic Channel
MIDI Mode
All Notes Off
Program Change Type
Velocity Map
Pressure Map
System Exclusive ID
SCSI ID
Bend Smooth
Local Keyboard Channel
Bank Select
Power Mode
Basic Channel
The basic channel determines which channel will always be available to receive MIDI
information. Depending on the MIDI receive mode (below), the Basic channel may be the only
receiving channel, or one of several.
MIDI Receive Mode (MIDI Mode)
The MIDI Mode parameter determines the MIDI receiving capabilities of the K2600. When set to
Omni, the K2600 responds to incoming MIDI events on all MIDI channels, and plays them on
the current channel. This is normally used for diagnostic purposes only.
At a setting of Poly, the K2600 responds only to events that are sent on the same channel as the
K2600Õs current MIDI channel (the one displayed on the top line of the Program-mode page). In
Poly mode, the currently selected channel is always the basic channel, so if you change channels,
the basic channel changes accordingly.
With a value of Multi (the default), the K2600 responds to events on all active channels. This is
the mode youÕll use when youÕre driving the K2600 with a sequencer, since you can play a
different program on each channel. At this setting, you can turn individual channels on and off
(on the CHANNELS page, described later in this chapter).
Range of Values
1 to 16
Omni, Poly, Multi
Normal, Ignore
Program Change Type List
Velocity Map list
Pressure Map list
0 to 127
0 to 7
On, Off
None, 1 to 16
0 only, 32 only, Ctl 0, Ctl 32
User, Demo
MIDI Mode
The RECEIVE Page
Default
1
Multi
Normal
Extended
1 Linear
1 Linear
0
6
On
None
Ctl 32
User
10-5