Lexmark MS810 User Manual page 296

Troubleshooting
Replace imaging unit, 0 estimated pages remain [84.xy]
Replace the imaging unit to clear the message and continue printing. For more information, see the
instruction sheet that came with the supply or see the "Replacing supplies" section of the User's Guide.
Note: If you do not have a replacement imaging unit, then see the "Ordering supplies" section of the
User's Guide or visit www.lexmark.com.
Replace maintenance kit, recommended life exceeded [80.xyz]
For more information, go to
Depending on your printer model, touch Continue or press
Replace maintenance kit to resume printing [80.xy]
For more information, go to
message.
If necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer
models, press
Replace missing cartridge [31.xy]
Install the missing toner cartridge to clear the message. For more information, see the "Replacing supplies"
section of the User's Guide.
Replace missing fuser [31.xyz]
Install the missing fuser. For more information, see the instruction sheet that came with the replacement part.
Replace missing imaging unit [31.xy]
Install the missing imaging unit to clear the message. For more information, see the "Replacing supplies"
section of the User's Guide.
Replace roller kit [81.xx]
1
Replace the roller kit. For more information, see the instruction sheet that came with the part.
2
Press to clear the message and continue printing.
Replace unsupported cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message and continue printing.
For more information, see the instruction sheet that came with the supply.
http://support.lexmark.com
http://support.lexmark.com
to confirm.
or contact customer support.
to clear the message and continue printing.
or contact customer support, and then report the
296