Lexmark MS810 User Manual page 159

Using MS812de
•
There are different ways of loading letterhead depending on whether an optional staple finisher is
installed or not.
•
If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the
long edge of the paper are on the right side of the tray.
Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam may occur.
Without an optional staple finisher With an optional staple finisher
One‑sided printing
Two‑sided printing
One‑sided printing
One‑sided printing
Two‑sided printing
Two‑sided printing
159