Lexmark MS810 User Manual page 227

Understanding the printer menus
Use
Timeouts
Job Hold Timeout
5–255
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Error Recovery
Max Auto Reboots
1–20
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Jam Assist
On
Off
Print Recovery
Page Protect
Off
On
Accessibility Settings
Prolong Screen Timeout
On
Off
To
Set the time the printer waits for user intervention before it
holds jobs that require unavailable resources.
Notes:
•
30 seconds is the factory default setting.
•
This menu appears only when a hard disk is installed.
Set the printer to restart when an error occurs.
Note: Reboot always is the factory default setting.
Determine the number of automatic reboots the printer can
perform.
Note: 5 is the factory default setting.
Let the printer automatically continue printing from certain
offline situations when these are not resolved within the
specified time period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Note: Auto is the factory default setting. The printer reprints
jammed pages unless other tasks need the memory required
to hold the pages.
Set the printer to check for jammed paper automatically.
Note: On is the factory default setting.
Set the printer to print the correct output for a page.
Note: Off is the factory default setting.
Remain in the same location and reset the Screen Timeout
timer instead of returning to the home screen.
Notes:
•
This menu appears only in touch‑screen printer models.
•
Off is the factory default setting.
227