Lexmark MS810 User Manual page 185

Paper and specialty media guide
1
Paper size
10 Envelope
DL Envelope
C5 Envelope
B5 Envelope
Other Envelope
1
If your preferred default paper size cannot be set in the printer control panel, then you may select common paper
sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper
size is not available, then select Universal or turn off tray size sensing. For more information, contact customer
support.
2
Paper is supported in long‑edge orientation.
3
Universal is supported in duplex mode only if the width is from 105 mm (4.13 in.) to 216 mm (8.5 in.), and the length
is from 148 mm (5.83 in.) to 356 mm (14 in.).
Paper sizes, types, and weights supported by the output options
Supported paper sizes
Paper size
A6
A5
JIS B5
Executive
Letter
A4
1
The finisher staples the paper if it is loaded long edge first.
2
The finisher stacks the paper but does not staple or punch holes in it.
3
The finisher stacks and staples the paper but does not punch holes in it.
4
The finisher staples the paper if its width is from 210 mm (8.27 in.) to 217 mm (8.54 in.).
Dimensions Standard or
optional 250‑
or 550‑sheet
tray
105 x 241 mm
(4.1 x 9.5 in.)
110 x 220 mm
(4.3 x 8.7 in.)
162 x 229 mm
(6.38 x 9.01 in.)
176 x 250 mm
(6.93 x 9.84 in.)
98 x 162 mm
(3.9 x 6.4 in.) to
176 x 250 mm
(6.9 x 9.8 in.)
4‑bin mailbox Output expander
and high‑capacity
Optional
2100‑sheet tray
X
X
X
X
X
output expander
Multipurpose
feeder
Staple finisher Staple, hole punch
X
1
2
2
185
Duplex
X
X
X
X
X
finisher
X
1,3
2
2