Date/Time Setup - Beckman Coulter UniCel DxC Synchron 800 Instructions For Use Manual

Date/Time Setup

Introduction
Date/Time Setup
Introduction
The Date/Time option allows the user to set the date and time, choose the date/time
formats that appear on all screens and reports, and restore date and time defaults.
The first time the instrument is powered up, the user must set the date and time. Once
set, changes to accommodate situations such as converting to daylight-savings time
are performed through this option. The Date/Time screen may be viewed at any time,
but may only be modified when the system status is Standby or Stopped.
Setup
To access Date/Time setup, from the Setup screen select <3> Date/Time. Then press
Date [F1] or Time [F2] respectively to change the date and/or time formats for the
system. Or you can press the Restore [F3] key to restore the default display format.
The default Date Display Formats are:
Order:
Day Format:
Month Format:
Year Format:
Separator:
The default Time Display Formats are:
Time Format:
Hour Format:
Separator:
Changes to system date and/or time may affect reagent expiration date,
calibration, quality control data, within-lot calibration status, and on-board
stability dates for reagents.
System Setup Options
Page 4-16
mm dd yy
Leading Zero (01)
Leading Zero (01)
1996 (four digit year)
/
24 hour
Leading Zero (01)
:
NOTICE
UniCel DxC Systems Instructions For Use A13914
October 2005