Implementing Changed Settings - ResMed ResScan Manual

Note: When using a Data Card, the recurring reminders setting will be ignored by therapy
devices that do not support it.
7. The program can be changed for devices that support multiple programs. To do this, in the
Options section select the required program from the Program drop-down. Check that the
selected program has the correct name.
Note: Changing programs sets the new program as the active program and also applies the
current settings.
8. Once you have changed the required settings, click Apply. You should then check the
settings status to ensure they have been successfully applied. The settings status indicates
any settings conflicts. When you are finished, click the Close button. Once the settings have
been applied, a note will be added.

Implementing Changed Settings

Settings changes made straight to a therapy device will be implemented as soon as you click
Apply. If you have made the changes to a Data Card, remove the card from the reader and send
it to the patient. The user guide supplied with the therapy device describes how to insert the
Data Card into the Data Card module enabling the therapy device to load new settings.
1
For S8 Series II, refer to the CD included with your device for information on Data Cards.
Settings
1
English 41