IBM 3164 ASCII Manual page 111

Chapter 5. Programming considerations
14. Jump Partition Command/Response
ESC" A (outbound inbound, or from the keyboard)
This command performs the same function as the Jump key
This response
IS
sent to the host when the Jump key
IS
pressed In echo or character mode.
15. Jump Page Command/Response
ESC! A (outbound, Inbound, or from the keyboard)
This command executes the same function as the Page key
This response is generated when the Page key is piessed
in
echo or character mode.
16. Window Position Command
ESC r Prh Pri Pch Pcl (outbound)
Parameter: Prh,Prl:
Pch,Pcl:
Window Start Row Number
Window Start Column Number
(Refer to the "Cursor and Buffer Address Table:" on page 5-80.)
This command is used to move the window to a specified position in the page. If the window
moves out of the page, the command error condition occurs,
17. Window Up Command/Response
ESC space A (outbound, inbound, or from the keyboard)
This command performs the same function as the Up key.
This response is sent to the host when the Up key is pressed in echo or character mode.
18, Window Down Command/Response
ESC space B (outbound, inbound, or from the keyboard)
This command performs the same function as the Down key.
This response is sent to the host when the Down key is pressed in echo or character mode.
19, Windo\N Right Command/Response
ESC space C (outbound, inbound, or from the keyboard)
This command performs the same function as the Right key,
This response is sent to the host when the Right key is pressed in echo or character mode,
5-24
(