Sam4s SER 7000 Quick Setup Manual page 40

RETAIL BARCODE SCANNING
ALLOCATION OF THE SCANNER TO A PORT
•
Select S-MODE then SERIAL PORT DEVICE SELECTIONS
•
Press ENTER on the PORT# number (this is the physical port the scanner is connected to).
•
Cursor Down then press ENTER on SCANNER
S-MODE PROGRAM MENU
7. SERIAL PORT DEVICE SELECTIONS
8. DEFINE SERIAL PORT PARAMETERS
9. S-MODE PROGRAM SCAN PRINTING
10. SYSTEM PASSWORD
11. SUPER MACRO SCAN
12. ROM FILE DOWNLOAD
u ENTER PAGE UP/DN ↑↓
SERIAL PORT SETTINGS
•
Select S-MODE then select DEFINE SERIAL PORT PARAMATERS
•
Enter the appropriate BAUD RATE, PARTIY, DATA & STOP bit settings from the table below.
Scanner Types and Settings
Samscan
All MS models
MS700
S-MODE PROGRAM MENU
7. SERIAL PORT DEVICE SELECTIONS
8. DEFINE SERIAL PORT PARAMETERS
9. S-MODE PROGRAM SCAN PRINTING
10. SYSTEM PASSWORD
11. SUPER MACRO SCAN
12. ROM FILE DOWNLOAD
u ENTER PAGE UP/DN ↑↓
PORT
Baud Rate Parity
2400 ODD
2400 ODD
9600 ODD
SERIAL PORT#1
PORT DESCRIPTION
BAUD RATE
PARITY
DATA BITS
STOP BITS
RETRIES
u ESC
40
SERIAL PORT DEVICE SELECTIONS
SCANNER
PORT#1
PORT#2
PORT#3
DATA Bits
8
8
7
PARAMETER
PORT1 -
ENTER PAGE UP/DN ↑↓
STOP Bits
1
1
1
RECEIPT
009600
NONE
8
1
00
SER-7000