Sam4s SER 7000 Quick Setup Manual page 12

CHECK TRACKING SYSTEM
MEMORY AL LOCATION
The memory is set as part of the initial start up procedure and can not be changed once entered.
NOTE PLEASE ENSURE THE IRC PROGRAMMING SECTION HAS BEEN COMPLETED AS SHOWN
PREVIOUSLY, SPECIFYING WHICH TERMINAL WI L L BE STORING CHECK TRACKING DATA.
•
Ensure the memory is allocated by using S-MODE option MEMORY ALLOCATION DISPLAY
CHECK TRACKING METHOD
CHECK TRACKING FILES 0-4
LINES PER CHECK/INTERRUPT
MAX NUMBR CHECKS (ALL FILES) – This is the number of checks available. This and the number of
HOLDS CLERK INTERRUPT
– This should be set to SOFT for detail tracking
– This options is the number of tracking files in use.
– This is the number of lines per bill 1 item is 1 line
lines apply to all check files
- The register which stores the central clerk data
S-MODE PROGRAM MENU
1. SELF TESTS
2. MEMORY CLEAR
3. MEMORY ALLOCATION DISPLAY
4. KEYBOARD KEY LOCATION
5. SYSTEM OPTIONS
PRINTER DRIVER SELECTION
6.
u ENTER PAGE UP/DN ↑↓← →
MEMORY ALLOCATION PROGRAMMING
6. # OF TIME I/O ENTRIES PER EMPLOYEE 24
7. USE GROUP BY EMPLOYEE
8. CHECK TRACKING METHOD
9. # OF TRACKING FILES (0-4)
10. # OF LINES PER TRANS.
REMAINING MEMORY
u ENTER PAGE UP/DN ↑↓← →
MEMORY ALLOCATION PROGRAMMING
11. # OF LINES PER CHECK
12. MAXIMUM # OF CHECKS
TRACK 1
TRACK 2
TRACK 3
REMAINING MEMORY
u ENTER PAGE UP/DN ↑↓← →
SOFT
1049924BYTES
0030
00010
00010
00010
1049924BYTES
12
Y
2
035
SER-7000