SMART CARD PAYMENT
MEMORY ALLOCATION
The memory is set as part of the initial start up procedure and can not be changed once entered.
•
Ensure the memory is allocated by using S-MODE option MEMORY ALLOCATION DISPLAY
# of category (0- 255) - This enables rewarding of specific card holders, for example CATEGORY 1 card
holder may receive 10% discount or points gained multiplied by 2 etc..
# of HOT LIST (0 - 999) -This memory option provides the ability to Hot list stolen or lost cards, the value
entered represents how many card references can be stored as hotlisted. This file is checked to
determine validity when a sale finalisation is attempted.
S-MODE PROGRAM MENU
1.
SELF TESTS
2.
MEMORY CLEAR
3.
MEMORY ALLOCATION
4.
KEYBOARD KEY LOCATION
5.
SYSTEM OPTIONS
6.
PRINTER DRIVER SELECTION
u ESC
ENTER
DEVICE ALLOCATION
It is required that the smartcard reader be programmed to one of the serial ports. The baud rate etc is default
and does not need changing (9600, ODD, NO PARITY).
•
Select S-MODE then SERIAL PORT DEVICE SELECTIONS
•
Press ENTER on the PORT# number (this is the physical port the Smartcard is connected to).
•
Cursor Down then press ENTER on SMARTCARD
S-MODE PROGRAM MENU
7.
SERIAL PORT DEVICE SELECTIONS
8.
DEFINE SERIAL PORT PARAMETERS
9.
S-MODE PROGRAM SCAN PRINTING
10. SYSTEM PASSWORD
11. SUPER MACRO SCAN
12. ROM FILE DOWNLOAD
u
ENTER PAGE UP/DN ↑↓
PAGE UP/DN ↑↓
MEMORY ALLOCATION DISPLAY
MIX & MATCH
35. # OF CATEGORY (0 – 255)
36. # OF HOT LIST (0 – 999)
37. NV BUFFER (0 – 999999)
38. CARD AUDIT MEMORY
REMAINING MEMORY
u
SERIAL PORT DEVICE SELECTIONS
PORT
PRINTER
SMARTCARD
PORT#1
PORT#2
PORT#3
28
L1
Y N N N N
000
000
000000
000000
1049924BYTES
ESC PAGE UP/DN
PRINTER TYPES
SER-7000