Service Software; Quick Guide For Phoenix Service Sw Installation; Phoenix Installation Steps In Brief; Issue 2.0 Mar/2005 Copyright © 2005 Nokia Corporation. - Nokia 616 Service Manual

Nokia Customer Care

Service Software

Quick Guide for Phoenix Service SW Installation

Phoenix Installation Steps in Brief

DCT-4 generation Test and Service Software is called "Phoenix".
These are the basic steps to install the Phoenix:
• Connect a DK2 Dongle or FLS-4S POS Flash Device.
• Install the Phoenix Service SW.
• Install the Data Package for Phoenix.
• Configure users.
• Manage connection settings (depends on the tools you are using).
Phoenix is now ready for FLS-4S Point Of Sales Flash Device use.
If you use FPS-8:
• Update FPS-8 SW.
• Activate FPS-8.
• Update JBV-1 Docking Station SW (only when needed).
Phoenix is now ready to be used also with FPS-8 flash prommer and other tools.
The Phoenix Service Software installation contains:
• Service software support for all phone models included in the package
Issue 2.0 Mar/2005
Copyright © 2005 Nokia Corporation
Company Confidential
TFE-4/RV-1
3 - Service Software
Page 3-3