Remove Data Cap; Remove The Junction Module; Assembly - Nokia 616 Service Manual

Nokia Customer Care
9. Remove the Data Cap.
10. Remove the Junction Module with the Heatsink still attached. Note: Junction Module
should not be separated from the Heatsink.

Assembly

Assembly after service will be carried out in the reverse order of the disassembly.
Note: Before returning device to customer make sure to reseal with a new Warranty Seal
label. All remains of the old one must be removed first.
Issue 2.0 Mar/2005
Company Confidential
Copyright © 2005 Nokia Corporation.
Company Confidential
TFE-4/RV-1
5 - Disassembly Instructions
Page 5-5