Related Manuals for Nokia 6162 - Cell Phone - AMPS
Summary of Contents for Nokia 6162 - Cell Phone - AMPS
- Page 1 Nokia PC Suite 4.6 User Guide PC/PDA Connectivity Guide for Nokia 6385/6370 Phones...
- Page 2 April 4, 2003. Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.
-
Page 3: Table Of Contents
Nokia PC Suite Installation ........5... - Page 4 Nokia Phone Editor ........
- Page 5 Understand your connection options ........70 Edit connections preferences .
- Page 6 [ iv ]...
-
Page 7: Introduction
Nokia PC Sync Note: Nokia Content Copier (a component of Nokia PC Suite) supports a variety of Nokia phones, some of which make their connection to a PC via serial cable. For a list of compatible phones and connection methods, please see “Learn about compatible phones”... -
Page 8: Learn About Compatible Applications
Note: This feature is available only if your service provider’s network supports digital data calls. Please check with your service provider prior to sending or receiving digital data calls. Before you can make digital data calls using your Nokia phone as a wireless modem: •... -
Page 9: Print This Guide
Introduction • PRINT THIS GUIDE If you have the electronic version of this guide only, Nokia recommends you print a copy for use during installation. No other applications should be running during the installation of PC Suite and during wireless modem setup. -
Page 10: Learn About Infrared Communications
IR ports of the two devices have to be pointing at each other. Your Nokia phone is a Class 1 Laser Product. Enable infrared communications Windows Millennium Edition (ME), Windows 2000, and Windows XP users do not need to enable infrared communications on their PC prior to using this feature. -
Page 11: Nokia Pc Suite Installation
Nokia PC Suite Installation 2 Nokia PC Suite Installation Nokia PC Suite 4.6 is a collection of powerful tools that you can use to manage your phone’s features and data. PC Suite consists of the following components: • Nokia Content Copier allows you to copy data between two Nokia phones, to back up your phone’s data to your PC, and erase data from... -
Page 12: Install Pc Suite
Before installing PC Suite Nokia recommends that Windows ME and XP users who want to use IR as their serial connection for PC Suite perform the modem installation prior to installing PC Suite. Please see “Wireless modem setup” on page 43 and perform this task prior to installing Nokia PC Suite. - Page 13 Select the language you wish to use with PC Suite, then click Next. Note: If you use a PIM application (Outlook, Lotus Organizer, etc.) and you want to use it with Nokia PC Sync, it is recommended that you select the same language used by your PIM.
-
Page 14: Remove Pc Suite
Scroll through the list of installed applications, then click Nokia PC Suite 4.6. Click the Add/Remove button. Click Remove from the Nokia PC Suite Setup window, then click Next. Follow the on-screen instructions until the setup wizard has completed removing the program. -
Page 15: Nokia Content Copier
6385/6370 phones in your family. The table on the following page shows a list of phones compatible with Nokia Content Copier (other than 6370 or 6385), as well as the method of connection to the PC: [ 9 ]... -
Page 16: Learn About Content Copier
Data can only be read from these phones, then copied to a 6385 or 6370 phone. Note: Nokia Content Copier does not support certain 5100 and 6100 series phones. For more information on specific models of incompatible phones, please see “Learn about other Nokia phones”... - Page 17 This phone is called the “source phone” and can be one of the phones listed on the previous page, or another Nokia 6370 or 6385 phone. • If you are copying your phone’s data and want to save it on your PC, Nokia Content Copier guides you through the process of saving the information to your PC’s hard drive.
- Page 18 Nokia Content Copier automatically names the files for you, based on the type of data that is read from the source phone. Copy information to the target phone Before you can copy information to the target phone, you need to load the information into the PC’s memory.
-
Page 19: Nokia Connection Manager
Use the check boxes next to the data types to select or deselect the information you want to copy to your phone, then click Next. Nokia Connection Manager You may need to use Nokia Connection Manager to select the type of connection you want Content Copier to use during various stages of the process. -
Page 20: Learn About Other Nokia Phones
At the Finish screen, you have the following options: • Click Save to save the log (.LOG) file to your PC’s hard drive. • Click New Action to return to the beginning of the Nokia Content Copier wizard. • Click Finish to exit Nokia Content Copier. - Page 21 Nokia Content Copier Protocol Nokia model number TDMA 5120, 5125, 5160, 5165 6120/6120i, 6160/6160i/6160m 6161/6161i, 6162/6162i/6162m, 8260 CDMA 3280, 3285 5170/5170i, 5180/5180i, 5185 6180/6180i, 6185/6185i GSM1900 3390, 3395 [ 15 ]...
-
Page 22: Nokia Pc Composer
4 Nokia PC Composer Nokia PC Composer allows you to create new ringing tones for your Nokia phone. Once you create a new ringing tone, you can transfer it to your phone via infrared or cable connection. PC Composer also allows you to open Standard MIDI files (type I) and Ringing Tones Text Transfer Language files. -
Page 23: Tour Pc Composer
Nokia PC Composer Once your MIDI playback device is set, you can hear each note as it is added to the staff or listen to the entire ringing tone (when you click the Play button). • TOUR PC COMPOSER The illustration below introduces you to PC Composer’s tools and... -
Page 24: Compose A New Ringing Tone
Create a new ringing tone Launch Nokia PC Composer (click Start, point to Programs, point to Nokia PC Suite, then click Nokia PC Composer). Click the appropriate note (or rest) button. Using the insert point, click the desired line or space on the staff (result: the note is placed on the staff, and is played by your PC’s... -
Page 25: Edit A Ringing Tone
Nokia PC Composer enter the pitches from your computer keyboard. The Recording Keyboard is displayed and identifies the computer keyboard equivalents to notes on a piano or MIDI keyboard. Click the Record button to display the recording keyboard. Click the desired note value button on the toolbar. -
Page 26: Learn About Other Pc Composer Views
Delete notes and rests You can delete a wrong note/rest or group of wrong notes/rests at any time. DELETE A SINGLE NOTE/REST Click the Selection tool button on the toolbar. Click the note or rest you want to delete, then press your keyboard’s Delete (DEL) key. -
Page 27: Save Your New Ringing Tone
Nokia PC Composer • SAVE YOUR NEW RINGING TONE When you are ready to save your new ringing tone, click the Save button on the toolbar. Use the Save as dialog box to set file name and location to save the new file. Default file type for your new ringing tone is .mid (MIDI). -
Page 28: Create Ringing Tones From Midi Files
If the MIDI sequence you want to use contains too many notes, the following error message is displayed when trying to open the file: Nokia PC Composer processes MIDI notes in octave 5 and 6 of the MIDI keyboard. If your MIDI sequence contains notes outside this range, the... -
Page 29: Edit And Save
Nokia PC Composer OPEN A STANDARD MIDI FILE To open a MIDI file: Click the Open button (or select Open from the File menu). Locate the MIDI file you want to use as a ringing tone, then click Open. Use the Track list box’s drop-down arrow and locate the desired track. -
Page 30: Work With Rtttl Ringing Tone Files
• WORK WITH RTTTL RINGING TONE FILES Ringing Tones Text Transfer Language (RTTTL) files are text files that contain various types of information that make up a ringing tone. When your phone receives a ringing tone over the air, your phone is actually receiving the information in RTTTL format. -
Page 31: Nokia Pc Sync
Warning: To avoid any potential loss of data, you should not make or receive calls while synchronizing data between the phone and your PC. Nokia PC Sync cannot be used while a data call is in progress. Likewise, you cannot initiate a data call while synchronizing data with PC Sync. -
Page 32: Set General Synchronization Properties
(click Start, point to Programs, point to Nokia PC Suite 4, then click Nokia PC Sync). Select your PIM application from the drop-down list, then click OK. Click the More button to view a summary of current/default settings. Set General synchronization properties Click the General tab, then select the information you want to synchronize. -
Page 33: Set Pim Properties
Nokia PC Sync Click the Calendar/To- do tab. Use the drop-down lists to define the range of time PC Sync uses during synchronization. Click the Contacts tab. Select the details you want synchronized with your phone. CONTACT DELETIONS By default, contacts deleted... -
Page 34: Synchronizing For The First Time
Important: Please refer to the PC Suite Troubleshooting document in the event synchronization is not successful or if PC Suite notifies you of errors. A link to this document can be found in the Nokia PC Suite 4 Program Group. -
Page 35: Understand The Basics Of Synchronization
Nokia PC Sync • UNDERSTAND THE BASICS OF SYNCHRONIZATION Nokia PC Sync remains running in the background after you synchronize for the first time. PC Sync places an icon in the Task Bar tray, indicating that the application is running. The colors of the icon change, depending on the status of the infrared connection between your phone and PC. -
Page 36: Start Synchronization
If at some point you change PIM applications or upgrade to a newer version of your current PIM, you must reconfigure PC Sync to work with the new application. Select New Synchronization from the Nokia PC Suite program group, then follow the instructions on page 25. -
Page 37: Create A Custom Contact List
Nokia PC Sync • CREATE A CUSTOM CONTACT LIST Users who have more than 500 names and numbers in their PIM should create a custom contact list or subset of their master contact list. Depending on the PIM application you use, you... - Page 38 To update PC Sync’s settings to synchronize with your custom list: Establish an infrared connection between your phone and PC. Launch Nokia PC Sync from your PC’s Start menu. If you have PC Sync enabled on startup, right-click the PC Sync tray icon, then click Configuration.
-
Page 39: Other Pim Applications
Nokia PC Sync Click the Summary tab, then click Synchronize Now to synchronize your phone and custom phone list. Other PIM applications Other PIM applications (such as Lotus Organizer) require that you create a completely new database file for your custom contacts list. Once you create a new database file, copy the desired contact information from your main contacts file to the new contacts file. - Page 40 UPDATE PC SYNC’S LOTUS ORGANIZER SETTINGS Establish an infrared connection between your phone and PC. Launch Nokia PC Sync from your PC’s Start menu. If you have PC Sync enabled on startup, right-click the PC Sync tray icon, then click Configuration.
-
Page 41: Nokia Phone Editor
Nokia Phone Editor 6 Nokia Phone Editor Nokia Phone Editor is a program that allows you to edit and manage various functions of your phone from the keyboard of your PC. Phone Editor consists of the following components: • Contacts - used to manage phone book entries. Also used to store contact information on your PC •... -
Page 42: Choose The Right Application For Managing Contacts
Nokia Phone Editor limitations Nokia Phone Editor can only manage contacts with one number per name. However, your phone’s memory is capable of storing multiple phone numbers and text fields (e-mail addresses, Web addresses, etc.) per entry. -
Page 43: Tour Nokia Phone Editor And Contacts Window
(or create a new contact in your PIM). Add or modify the contact information as necessary, then save your work. Launch Nokia PC Sync and synchronize your PIM and phone. • TOUR NOKIA PHONE EDITOR AND CONTACTS WINDOW... -
Page 44: Manage Contacts Using Phone Editor
• MANAGE CONTACTS USING PHONE EDITOR Once you launch Nokia Phone Editor, click the Phone folder the contacts directory. A list of all phone book entries is displayed in the pane to the right of the contacts directory. Many of the Phone Editor commands are available from the program’s shortcut menu. -
Page 45: Add A Contact To A Caller Group
Nokia Phone Editor Delete button on the toolbar. -OR- • Right-click the contact you want to delete, then click Delete on the shortcut menu. Copy and move contacts Your PC’s hard drive offers you virtually unlimited storage space for names and numbers. You can copy phone book entries to the Phone Editor’s PC folder... -
Page 46: Edit Profiles And Caller Groups
• EDIT PROFILES AND CALLER GROUPS You can use Nokia Phone Editor’s Profiles application to view your profiles and caller groups settings at a glance. You can edit profile and caller group settings quickly and easily from your PC’s keyboard. - Page 47 Nokia Phone Editor Edit caller groups Click the Caller group tab (or click the Caller Groups folder). Click the name of the caller group you want to edit from the list. Use the drop-down arrow to select a new ringing tone for the selected caller group.
-
Page 48: Edit Settings
• EDIT SETTINGS You can use Nokia Phone Editor’s Settings application to view and edit a variety of phone settings, as well as configure how Phone Editor handles items you delete. The Settings application divides all of the settings into three properties tabs, as described below: •... -
Page 49: Wireless Modem Setup
Wireless modem setup 7 Wireless modem setup Your phone can function as a wireless modem when connected to your PC. Once your phone is installed and configured properly, your phone works in conjunction with your existing data software, allowing you to connect to a corporate network, the Internet, or check e-mail wherever you are. - Page 50 In addition, the fastest CSD data rate available is 14.4k bps. 1XRTT (1X)/packet data Your Nokia phone is the first in a new generation of phones to take advantage of a new higher-speed data protocol called 1XRTT (1X). The benefits to you include: •...
- Page 51 Wireless modem setup Additional software on your PC (or modification of your PC’s current network settings) may also be required. For more information on VPN services, please contact your network administrator. Important: Likewise, some ISPs may not permit access to certain services from Internet connections outside of your ISP’s domain (for example: checking or sending e-mail, newsgroup access) .
-
Page 52: Understand Modem Software
• UNDERSTAND MODEM SOFTWARE During the modem installation process, Windows looks for software specific to the new device being installed. The modem software (“driver”) for your phone must be downloaded from the Nokia 6385 or 6370 phone’s product section of: http://www.nokia.com... -
Page 53: Connect For The First Time Using Dlr-3P Or Dku-6
Wireless modem setup Multiple modem installations Important: Windows 2000 Professional users who wish to connect to a PC using IR, please see “Learn about IR and Windows 2000” on page 52 for more information on modem setup for your operating system. - Page 54 RS232-to-PS/2 adapter and move your mouse to an available PS/2 port, or purchase a PS/2 mouse. Check with your local computer dealer for these accessories. Connect the cable to your Nokia phone. Your phone displays a message indicating you have...
-
Page 55: Connect For The First Time Using Ir (Windows 98, Me)
Select A:\ or the floppy drive option (as necessary), then click Next. Select the correct modem for the type of data you plan on using (for example: Nokia 6385 3G Packet Data Modem for 1X packet data), then click Next. -
Page 56: Establish An Infrared Connection
Establish an infrared connection between your PC and your phone. Install your phone as a wireless modem connected via infrared. Configure your data software to use your phone as the active modem for data and fax calls. Establish an infrared connection The preferable distance between the two devices making an infrared connection is a range of three inches (7.5 cm) to three feet (.9 m) maximum. -
Page 57: Create Additional Modem Installations
For example, if you want to use 1X packet data for Web browsing and e- mail, you should select Nokia 6385 3G Packet Data Modem the first time you perform the modem installation. If you also want the ability to send faxes, you need to create an additional modem installation and select Nokia 6385 Data Fax Modem for circuit-switched data services. -
Page 58: Learn About Ir And Windows 2000
Microsoft redesigned its implementation of infrared services with the release of Windows 2000 Professional. To make an IR serial connection between IR-equipped Nokia phones and IR-equipped PCs running Windows 2000, you must download and install the following Microsoft software update:... -
Page 59: Windows 2000 Modem Setup Instructions
When a successful infrared connection has been made, the infrared monitor indicates that your phone has been found. Windows 2000 installs your Nokia phone as Standard Modem over IR link (please see illustration on the following page). [ 53 ]... - Page 60 Confirm successful installation of your phone via the Phone and Modem Options Control Panel. Modify Standard Modem installation If you plan on using IR as the primary connection to your PC, you must use the Standard Modem over IR link driver for all digital data/fax calls. Because you cannot have multiple installations of this standard modem driver, you need to modify the existing modem properties so your phone can make the correct type of data connection.
-
Page 61: Connect For The First Time: Ir (Windows Xp Home And Professional)
Wireless modem setup Before making a digital data or fax call, make sure the correct initialization string appears in the Extra Initialization commands field, located in Standard Modem over IR link’s Advanced Properties screen: Establish an IR connection between your phone and PC. From the list of installed modems, click Standard Modem over IR link, then click Properties. -
Page 62: Data And Fax Software Configuration
The following pages are designed to help you configure some of the more popular applications to be used with your Nokia phone • OBSERVE THE FOLLOWING FIRST •... -
Page 63: Use Microsoft Dial-Up Networking For Packet Data (2G, 3G) And Qnc
Type a name for your new connection (for example: Internet-3G Packet Data). Click the drop-down arrow and select your Nokia phone as the modem to use, then click Next. Enter the packet data or QNC network access code (for example: #777 ), then click Finish. -
Page 64: Configure America Online To Connect Via Packet Data Or Qnc
Connect to the packet data or QNC network Establish a connection between your phone and PC. Double-click the new connection (for example: Internet-3G Packet Data). Supply user name or password (as needed), then click Connect Your phone displays Creating packet data connection while establishing a connection. -
Page 65: Use Microsoft Dial-Up Networking-Csd
(including corporate e-mail server using Microsoft Outlook, or Lotus cc:Mail). Rather than altering the existing configurations you use when dialing with your existing modem, consider creating a new connection exclusively for use with your Nokia phone (as detailed below). [ 59 ]... -
Page 66: Create A New Connection
Double-click the Make New Connection icon. Type a name for your new connection (for example: Internet-Nokia phone). Click the drop-down arrow and select your Nokia phone as the modem to use, then click Next. Enter the area code, telephone number, and country code (if necessary), then click Next. -
Page 67: Get Connected To America Online (Aol)
Your America Online software can be configured to use your Nokia phone as a wireless modem. MODEM SETUP To add your Nokia phone as a new modem to AOL’s connection setup: From the Sign On screen, click SETUP. Click Expert Setup, then click the Devices tab. - Page 68 Set the port speed to 144000 bps, then click OK. Modify “Locations” Now that your Nokia phone is configured for use by the AOL software, you need to modify your Locations settings to use your Nokia phone as the active modem.
-
Page 69: Learn About Other Data Applications
• LEARN ABOUT OTHER DATA APPLICATIONS There are several other types of telecommunications applications that can be used with your Nokia phone and your computer. Some of these include: • Terminal Programs - used to connect to BBS services (bulletin board system) and mainframe or mini-mainframe computers. - Page 70 Nokia does not endorse or provide support for any of the above applications or services. REMINDERS! Before you can use your Nokia phone with ANY data program, you must first do the following: • Establish a connection between your phone and PC using either IR or serial cable.
-
Page 71: Configure Your Fax Software
PC or laptop computer, including Symantec WinFax Pro, Smith Micro Software HotFax (version 3.02 or newer), Castelle FaxPress, etc. Note: Data or fax calls using your Nokia phone are possible only if your service provider supports digital data and fax service. You may be required to subscribe to these services. -
Page 72: Learn About Manual Selection Of Incoming Calls
• LEARN ABOUT MANUAL SELECTION OF INCOMING CALLS You can receive digital data or fax calls with your PC using your Nokia phone the same way that you would using your existing modem. However, certain service providers require that you “preset” your phone to receive incoming data or fax calls, rather than having the phone automatically detect the type of incoming call. - Page 73 Data and fax software configuration Pre-arranged data and fax call settings in your data/ fax software Before you can successfully receive a digital data call or fax transmission in this situation, your phone must receive a special command from your data or fax software.
-
Page 74: Menu Options
You should only have to make this modification once; the modem configuration is usually saved as a part of your data or fax program’s settings. Please refer to your program’s documentation or online help files for more information. Pre-arranged data and fax call settings from phone menu options Your phone contains a menu option that should be used to configure your phone for inbound data and fax calls. -
Page 75: Palmos Configuration
PalmOS configuration 9 PalmOS configuration Important: The following instructions are based on PalmOS (operating system) software 3.3 and those devices that can run this version of the operating system (or newer versions). For more information, please visit: http://www.palmos.com/ • LEARN ABOUT PACKET DATA, QNC, AND CIRCUIT SWITCHED DATA Before you can use your phone as a wireless modem with your data or fax software, there are a few things you need to know about recent... -
Page 76: Understand Your Connection Options
Important: To access the Internet using CSD, you must have an existing dial-up account with a full-service Internet provider or dial- up access to a corporate network. Connection to on-line services such as CompuServe or Prodigy are not available at this time. Note: America Online provides a software program that allows you to check your AOL E-mail from your handheld device. - Page 77 There must be no obstructions between the two devices and the IR ports of the two devices have to be pointing at each other. Your Nokia phone is a Class 1 Laser Product. [ 71 ]...
-
Page 78: Edit Connections Preferences
Click Details. Set speed to 57,600 bps and flow control to Automatic. Click OK when finished, then click OK to close the Edit window. Your new Nokia phone configuration should now appear in the list of Connection options, and is available to all applications that support a modem connection. -
Page 79: Make A Dial-Up Connection
PalmOS configuration • MAKE A DIAL-UP CONNECTION Once you have a modem configuration for your Nokia phone, you can use that configuration with any existing TCP/IP or network preferences, as well as any stand-alone 3rd party E-mail, Web browser, or fax programs. - Page 80 CSD data connection Once your Nokia phone is configured as a wireless modem for use with your PalmOS device, you need to modify your existing Windows RAS configuration to use your phone as the active modem. Tap the Applications icon, then tap Prefs.
-
Page 81: Pocketpc Configuration
• LEARN ABOUT YOUR PHONE AS A WIRELESS MODEM You can use your Nokia phone as a wireless modem with Pocket PC devices, then use these devices to check e-mail or browse the Web. You may also be able to send and receive faxes from your Pocket PC device. -
Page 82: Understand Your Connection Options
• UNDERSTAND YOUR CONNECTION OPTIONS You can create a connection between your PocketPC device and your phone using either the DLR-3P cable or IR. DLR-3P cable connection Most PocketPC devices come with a serial cable used to connect your device with a desktop PC or laptop computer. This cable has either a USB male connection or an RS-232C female connection at one end, and a special connector that plugs into the handheld device (either directly or via a docking cradle). -
Page 83: Create A Modem Connection-Packet Qnc
• CREATE A MODEM CONNECTION-PACKET & QNC The procedure for creating a new modem connection for use with your Nokia phone is similar to that found in the various Windows desktop operating systems. Important: You may need to first disable your Pocket PC’s option that automatically begins synchronization when a connection is detected. - Page 84 Tap the Connections tab, then tap Modem. Tap New Connection, then enter a name for the connection (for example: Internet-Packet). Click the modem selection drop-down arrow, then select the IrCOMM or Generic IrDA (IR) or Hayes Compatible on COM1 (DLR-3P). Set the baud rate to 57600, then tap Next.
-
Page 85: Data Modem Connection
PocketPC configuration Important: You may need to click the Dialing tab and modify the way Pocket PC dials to connect to the packet data or QNC data network. For more information on dialing patterns, consult your handheld device’s documentation. Tap Wait for dialtone to deselect this option, then tap Finish. Your new dialing configuration is now visible in the Modem Connections list. -
Page 86: Configure A Modem Connection-Csd
• CONFIGURE A MODEM CONNECTION-CSD The procedure for creating a new modem connection for use with your Nokia phone is similar to that found in the various Windows desktop operating systems. However, before you can configure your PocketPC for a CSD data call, you need to obtain the required setup information from your ISP or corporate network’s Helpdesk. - Page 87 Tap the Connections tab, then tap Modem. Tap New Connection, then enter a name for the connection (for example: Internet-Nokia phone). Click the modem selection drop-down arrow, then select the IrCOMM or Generic IrDA (IR) or Hayes Compatible on COM1 (DLR-3P).
- Page 88 Tap Wait for dialtone to deselect this option, then tap Finish. Your new dialing configuration is now visible in the Modem Connections list. You may need to click the Dialing tab and modify the way Pocket PC dials local, long distance, and international numbers. For more information on dialing patterns, consult your handheld device’s documentation.
-
Page 89: Before You Make A Digital Data Call
PocketPC configuration example: Internet-Nokia phone). Enter your user name, password, and domain (if necessary). Click Connect. When you have successfully logged on to the network, the Pocket PC’s status screen will show the message Device Connected. Launch your browser or e-mail application. -
Page 90: Macintosh Configuration
11 Macintosh configuration It is possible to connect your phone to Macintosh computers (PowerPC, G3, G4, PowerBook iMac and iBook computers) and use these devices to send and receive faxes, check E-mail or browse the Web. Your phone acts as an external modem, and works in conjunction with your existing data and fax applications. -
Page 91: Configur The Macintosh Os
Internet, or to send and receive faxes, you will have to use the Modem control panel to switch the active modem to your Nokia phone each time you need to use it. Nokia recommend you download and install the freeware configuration utility, FreePPP from your favorite shareware site (www.download.com,... - Page 92 • Port Speed - 19200 bps Flow Control - CTS & RTS (DTR) • • Dial type - Tone In the Modem init string settings section, click the Use: option and enter the following init string: AT&F Click OK, then click the Accounts tab. Click New.
- Page 93 Click OK to complete this section. Use the pull-down menu to select your Nokia modem, and the account to which you wish to connect. Click the Connect button to dial the phone. [ 87 ]...
-
Page 94: Use Other Data/Fax Applications
FreePPP Connection (from the menu) to dial the last configuration. • USE OTHER DATA/FAX APPLICATIONS You can use your Nokia phone with your favorite fax application to send and receive faxes. Please read the section, “Data and fax software configuration” on page 56 for more information on configuring your fax software to be used with your Nokia phone. - Page 95 Index Numerics infrared interruptions to IR 1X (1XRTT) 44 Compatible applications 2 1XRTT Compose a ringing tone 18 make a data call (PocketPC OS) Configure data software 56 Palm OS configuration Configure fax software 65 1XRTT (1X) 44 Configure PC Sync 25 1XRTT data Connect to a network/Internet 58 Dial-up Networking...
- Page 96 Data call configure data software GPRS establish IR connection dial-up connection for PalmOS modem installation modem setup (PocketPC OS) Data call notes 63 when to use Data calls GPRS data Manual selection AOL settings Prearranged Delete contact 38 Delete notes and rests 20 Hardware setup Deleting contacts-settings 27 PC Composer...
- Page 97 Outlook PC Sync configuration New modem connection 57 calendar and conacts New Synchronization 30 general Nokia Modem Setup (Windows 2000) PIM properties resolving conflicts Note capacity 18 Phone Editor ringing tone add/delete contacts Notes on data calls 63 change group graphic NT Workstation 4.0 55...
- Page 98 system Using PocketPC modem connection (CSD) 82 Resolving synchronization conflicts Ringing tone edit Windows 2000 Infrared 52 PC Composer Windows ME installation note 5 Windows XP installation note 5 playback Wireless modem ringing tone 18 make a data call (1XRTT) Ringing tones make a data call (CSD) from MIDI files...