Input Device Cuw-3; Loudspeaker Sp-2 - Nokia 616 Service Manual

Carkit phone (tfe-4/rv-1)
Hide thumbs Also See for 616:
Table of Contents

Advertisement

Nokia Customer Care
Warning:
MAKE SURE THAT THE RU BRACKET SUPPLIED IS MOUNTED IN SUCH A WAY THAT THE
RU SLIDES INTO PLACE TOWARDS THE FRONT OF THE CAR OR IS MOUNTED SIDEWAYS.
OTHERWISE THE RU MAY BREAK LOOSE IN THE CASE OF AN ACCIDENT AND CAUSE AN
INJURY..
Display SU-11/21 (Pos.2)
The mount for the display unit is to be fixed to the dashboard or to any other location in
the cockpit area where the display is clearly visible to the user but does not impair con-
trol or operation of the vehicle.
Input device CUW-3 (Pos.3)
The Input device is supplied with a mount that is to be fixed in a suitable location where
it is easily accessible to the user. As an alternative, the Nokia input device, type HSU-4
may be mounted for use with the CarKit Phone instead. However, take particular care to
ensure that the input device will not interfere with the driver's operation of the vehicle.
Make sure that the cable will reach to the RU for connection.
Loudspeaker SP-2 (Pos.4)
To ensure good acoustic quality, mount the loudspeaker so that it points in the driver's
direction. It is also recommended that the loudspeaker is mounted a minimum distance
of 1 metre away from the microphone to avoid feedback.
Issue 2.0 Mar/2005
Company Confidential
Figure 1: How to mount the RU in the car
Figure 2: How to mount the Display Unit
Copyright © 2005 Nokia Corporation
Company Confidential
TFE-4/RV-1
7 - Installation
Page 7-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

610

Table of Contents