Nokia Customer Care
USE OF JBT-9 BLuetooth FBUS INTERFACE
The JBT-9 can be connected to a PC by using an AXS-4 serial cable. The Bluetooth wire-
less technology can be used to establish a FBUS connection without any cables and line
of sight. The phone must be switched on with SIM card and all Phoenix functions are
working as long as the phone is in NORMAL mode.
PHOENIX CONNECTION SETUP FOR JBT-9 AS BT FBUS INTERFACE
In Phoenix under the "File", "Manage Connections" menu the Bluetooth connection has
to be added.
• Push down "Add" button and select the "Manual" mode.
• Select "Bluetooth" as media:
Issue 2.0 Mar/2005
Company Confidential
Copyright © 2005 Nokia Corporation
Company Confidential
TFE-4/RV-1
Troubleshooting
Page 6-19