Customer Care, User Guidance
Only qualified personnel should install or repair Nokia equipment.
Use only approved accessories. Do not connect incompatible products.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user's guide for detailed safety instruc-
tions. Do not connect incompatible products.
Nokia requires that product service points have sufficient ESD
protection (against static electricity) when servicing products.
Any product of which the covers are removed must be handled
with ESD protection. The SIM card can be replaced without ESD
protection if the product is otherwise ready for use.
To replace the covers ESD protection must be applied.
All electronic parts of the product are susceptible to ESD. Resis-
tors, too, can be damaged by static electricity discharge.
All ESD sensitive parts must be packed in metallized protective
bags during shipping and handling outside any ESD Protected Area
Every repair action involving opening the product or handling the
product components must be done under ESD protection.
ESD protected spare part packages MUST NOT be opened/closed
out of an ESD Protected Area.
For more information and local requirements about ESD protec-
tion and ESD Protected Area, contact your local Nokia After Mar-
ket Services representative.
Issue 2.0 Mar/2005
For your safety
Copyright © 2005 Nokia Corporation