Identifier
Status
Removing the coin-cell battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS setup program's
settings to default. It is recommended that you note the BIOS setup
program's settings before removing the coin-cell battery.
Identifier
Status
Prerequisites
1
Remove the
back
2
Remove the
system-board
Identifier
Status
Procedure
1
Locate the coin-cell battery on the system board.
2
Peel the rubber coin-cell holder from the system board.
70
GUID-30EEBC49-DE3E-4C3F-8226-86CE5F32F388
Released
computer. After working inside your computer, follow
After working inside your
GUID-80B6901A-84B9-4E89-AECE-A1BD484B2AEF
Released
cover.
shield.
GUID-01EC65AE-C2F6-4D81-A440-D5D6CA144EAF
Released
computer. For more safety best
www.dell.com/
Before