Identifier
Status
Replacing the memory modules
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Align the notch on the memory module with the tab on the memory-module slot.
2
Slide the memory module firmly into the slot at an angle.
3
Gently press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and
reinstall it.
76
GUID-1F5023F5-9868-4AAF-A9F5-BFB400CD890A
Released
computer. After working inside your computer, follow
After working inside your
GUID-B16B0287-A249-42BB-BCAC-B17FA278CE3A
Released
computer. For more safety best
www.dell.com/
Before