Removing The Fan; Prerequisites; Procedure - Dell inspiron 27 7000 Service Manual

Identifier
Status

Removing the fan

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

1 Remove the back
2 Remove the system-board
Identifier
Status

Procedure

1 Disconnect the fan-power cable (FAN_SYS) from the system board.
2 Remove the fan-power cable (FAN_SYS) from the routing guides.
3 Remove the three screws (M3x5) that secure the fan to the middle frame.
GUID-FAA962E5-AD4D-4E85-BCA3-D99993D9AFD2
Released
computer. After working inside your computer, follow
After working inside your
GUID-80B6901A-84B9-4E89-AECE-A1BD484B2AEF
Released
cover.
shield.
GUID-C794653C-5FEF-4E2A-930E-906EB4783424
Released
computer. For more safety best
www.dell.com/
Before
61