Identifier
Status
Replacing the stand
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Align the screw holes on the stand with the screw holes on the middle frame.
2
Replace the six screws (M4x6) that secure the stand to the middle frame.
Identifier
Status
Post-requisites
Replace the
back
26
GUID-A1A7E0D7-52BF-4F80-84FE-DF5301AE97BA
Released
computer. After working inside your computer, follow
After working inside your
GUID-8E62DBB0-559F-4B2D-858A-F1656232760C
Released
GUID-6C2AFA20-3736-4FA0-82F0-ADE9E9240AD7
Released
cover.
computer. For more safety best
www.dell.com/
Before