Dell inspiron 27 7000 Service Manual page 131

Advanced—Miscellaneous Devices
Always Perform
Integrity Check
Table 6. USB Configuration
Advanced—USB Configuration
Rear USB Ports
Side USB Ports
USB debug
Table 7. Power options
Advanced—Power Option
Wake Up by
Integrated LAN/
WLAN
AC Recovery
Deep Sleep Control Configure the Deep Sleep support mode.
USB Wake Support Enable the USB devices to wake the computer from Standby.
USB PowerShare
in S4/S5 State
USB PowerShare
in Sleep State
Auto Power On
Enable or disable the integrity check function.
Default: Disabled.
Enable or disable the USB ports at the back of your computer.
Default: Enabled.
Enable or disable the USB ports at the side of your computer.
Default: Enabled.
Enable or disable the USB debug feature.
Default: Disabled.
If enabled, wakes the system using a network message.
Default: Disabled.
NOTE: This option can be enabled only if the Deep
Sleep Mode is set to Disabled.
Select the action the computer takes when power is restored.
Default: Power off.
Default: Enable in S4 and S5.
Default: Disabled.
Enable or disable USB PowerShare in S4/S5 State.
Default: Disabled.
Enable or disable USB PowerShare in sleep state.
Default: Normal.
Enable or disable the computer from turning on automatically.
Default: Disabled.
131