Identifier
Status
Removing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Prerequisites
1
Remove the
back
2
Remove the stand.
3
Remove the
inner
Identifier
Status
Procedure
NOTE: Note the routing of the cable as you remove it so that you can
reroute it correctly after you replace the power-button board.
1
Open the latch and disconnect the power-button board cable (0SDC1) from the
power-button board.
2
Remove the two screws (M2x3.5) that secures the power-button board to
middle frame.
42
GUID-A35BD2D5-B3B3-4708-AF1C-D61C58B9F952
Released
computer. After working inside your computer, follow
After working inside your
GUID-F35C996A-766A-42C4-AF15-BDAAFABE98EB
Released
cover.
frame.
GUID-0529F3FF-B349-427A-BA7C-8805F4692DE5
Released
computer. For more safety best
www.dell.com/
Before