Identifier
Status
Replacing the microphones
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Using the alignment post, place the microphone modules (4) into their respective
slots on the middle frame.
2
Replace the four screws (M2x4) that secures the microphone module to the
middle frame.
3
Connect the microphones cable (DMIC1) to the microphone modules (4).
Identifier
Status
Post-requisites
1
Replace the
inner
2
Replace the stand.
3
Replace the
back
GUID-3A2F1E45-BFAC-42D9-984B-18155ED41333
Released
computer. After working inside your computer, follow
After working inside your
GUID-4FEB7BCD-F2C2-4AC2-8895-63756A61115C
Released
GUID-5BE3AE14-06F3-4D93-8158-E706F91E6665
Released
frame.
cover.
computer. For more safety best
www.dell.com/
Before
41