Identifier
Status
Replacing the side I/O-board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Slide the side I/O-board into the slots on the side I/O-board bracket.
2
Align the screw holes on the side I/O-board with the screw holes on the side
I/O-board bracket.
3
Replace the two screws (M3x5) that secure the side I/O-board to the side I/O-
board bracket.
Identifier
Status
Post-requisites
1
Follow the procedure from step 3 to step 7 in
2
Replace the
inner
3
Replace the stand.
4
Replace the
back
GUID-2EFE7E92-337F-4710-A2AB-08FF9D39DEFF
Released
computer. After working inside your computer, follow
After working inside your
GUID-97B32948-FA94-4179-B78C-59C73C00409E
Released
GUID-E12874A0-3312-443D-9D5A-7BB5A10BD261
Released
frame.
cover.
computer. For more safety best
www.dell.com/
"Replacing the media-card
Before
reader".
57