Removing The System-Board Shield; Prerequisites; Procedure - Dell inspiron 27 7000 Service Manual

Identifier
Status
Removing the system-board
shield
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

Remove the back
Identifier
Status

Procedure

1 Remove the six screws (M3x5) that secure the system-board shield to the
middle frame.
58
GUID-342B5CBF-63A8-4038-B670-4F7C53E1E5DE
Released
computer. After working inside your computer, follow
After working inside your
GUID-67F8B481-ACBA-47A0-BCAF-357C6042B18E
Released
cover.
GUID-7A23643F-66BC-46AC-ABF5-D65B4593759E
Released
computer. For more safety best
www.dell.com/
Before