Security Menu; Boot Menu - Prestigio Visconte 125W User Manual

Security Menu

Set Supervisor Password (Security Menu)
You can set a password for access to the Setup utility. This will not affect access to the computer OS (only the Setup utility).
You can set the user password from the sub-menu (Set User Password) after you have set the supervisor password.
Set User Password (Security Menu)
You can set a password for user mode access to the Setup utility. This will not affect access to the computer OS (only the Setup
utility). Many menu items in the Setup utility cannot be modified in user mode. You can only set the user password after
you have set the supervisor password.
Note: To clear existing passwords press Enter and type the existing password. Then press Enter for
the new password (without typing any password entry) and Enter again to confirm the password
clearance.

Boot Menu

Boot Menu
When you turn the computer on it will look for an operating system (e.g Windows XP) from the devices listed in this menu,
and in this order. If it cannot find the operating system on that device, it will try to load it from the next device in the order
specified in the Boot Menu. Boot devices usually are hard drives, floppy drives (removable devices), and CD-ROMs.
When you specify a device as a boot device on the Boot Menu, it requires the availability of an operating system on that
device. Most home computers come with an operating system already installed on "Drive C:" .
If you wish to boot from a CD-ROM you will need to add it to the boot order.
As a general rule the order below is recommended:
1. Removable Devices (usually external USB floppy disks)
PRESTIGIO VISCONTE 125W
33