System Security - Prestigio NOBILE 156 Technical & Service Manual

Prestigio Nobile 156

System Security

The System Security screen contains parameters that help safeguard and protect your computer from
unauthorized use.
Information
Set Supervisor Password
Set User Password
Password on boot
Set Primary Hard Disk Password
F1 Help
Esc Exit
The following table describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings.
Parameter
Set Supervisor Password
Set User Password
Password on boot
Set Primary Hard Disk
Password
PhoenixBIOS Setup Utility
Main Advanced
[Enter]
[Enter]
[Enabled]
[Enter]
Select Item F5/F6 Change Values
Select Menu Enter Select
Description
While entering SETUP, BIOS need to request user to enter
supervisor password if set.
This password protects the BIOS SETUP menu from
unauthorized modification.
Help: Supervisor Password controls accessing the whole
setup utility. It can be used to boot up when Password on
boot is enabled.
During POST, BIOS need to check user password if set.
This password protects the system from unauthorized user
entry before OS boots up.
Help: User Password controls accessing part of the setup
utility. It can be used to boot up when Password on boot is
enabled.
Enable or disable password entry on boot up.
This password protects the internal hard disk to prevent from
any unauthroized access. When there is no hard disk
existance, this item should be hidden. If S/W jumper: Hide
HDD Password is Enabled, this item should be hidden.
Help: Input HDD Password to prevent from any unauthorized
access to the internal hard disk.
Security
Supervisor Password
controls access to the
setup utility.
Sub-Menu
42
TECHNICAL SERVICE MANUAL
Boot Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Options
Enter
Enter
Enabled or Disabled
Enter