Table of Contents
Advertisement
Schemes
Use Schemes to configure quick settings for applications that require specific resolution and color settings in order to run
properly e.g. games, multimedia programs. To set the schemes:
1. Go to the Intel(R) 82852/82855 GM/GME Graphics Controller Properties control panel.
2. Click on Schemes (tab).
3. Select New to setup the scheme, and type a name in the dialog box that pops up, then click OK.
4. Click on the scheme name you had typed in the Schemes box, and choose the option you wish to use from the Video Modes
box.
5. Browse to the executable file for the application you want to set a scheme for (see sidebar).
6. You can click in the "Reset On Exit" box to return to your original settings when you exit the program, then click Save to
save the settings.
7. When you want to run the program, select it from the Schemes box and click "Invoke" to run the highlighted program in
the chosen video setting (alternatively you can select it from Display Modes by clicking on the icon option in the taskbar at
the bottom right of the screen).
Application.exe
You will need to locate the actual application executable (.exe) file, not just the shortcut. To find
the application right-click its shortcut on the desktop click Properties. Click the Shortcut (tab) and
see where the executable file is located by clicking the Find Target (button). Note the location and
you will then be able to browse to this file.
Display Devices
Besides the built-in LCD, you can also use an external monitor (CRT) as your display device. A monitor connects to the external
monitor (VGA) port (1).
Switching/Enabling Displays (Keyboard)
You can switch display devices with the Fn + Display (F7) toggle. With the video driver installed, you also can use its built-
in controls to switch the display options. To switch the display options:
1. Plug the monitor into the appropriate port.
2. Press and hold the Fn key, while simultaneously pressing the F7 key.
3. You may toggle through the options to display the LCD only, the external display alone and the LCD and the external display
together (make sure you allow time for the screens to refresh as you toggle through).
Using the Driver to Switch Displays
If you only use the keyboard toggle to switch through the display options you will not have all the
configuration options available to you. If you want to access all the options, use the driver control
panel to configure the settings.
Switching/Enabling Displays (Driver)
With the video driver installed, you can use the built-in controls to switch between the displays as follows:
1. Plug the monitor into the appropriate port.
2. Go to the Intel(R) 82852/82855 GM/GME Graphics Controller Properties control panel and select Devices (tab).
3. Choose the display option from the list on the left and click Apply (and OK to confirm the settings change).
4. The notebook will be the Primary display, and the monitor the Secondary. See the following pages for instructions on
enabling Clone and Extended Desktop modes.
20
PRESTIGIO VISCONTE 125W
Advertisement
Table of Contents
