Appendices; Appendix A: Summary Of Led Operation; Status Display Operation - Honeywell 7847i-E Installation And Setup Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Appendix A: Summary of LED Operation

Status Display Operation

The 7847i-E Status Display has three LEDs used to indicate message and device status:
• STATUS, green
• MESSAGE, yellow
• FAULT, red
Figure 11. 7847i-E Status Display LEDs with Front Cover Installed
Each LED can have four different states - ON, OFF, FAST BLINK and SLOW BLINK.
Throughout this document, the following key is used to describe LED state:
Figure 12. LED Key

Appendices

A-1