Battery Operation - CME NIKI V4 Service Manual

The "Locking" Option
The NIKI V4 has a unique option, which enables the user to lock out the setting keys,
so that entered parameters, or set programs cannot be changed once they are set,
especially during operation.
This option is important in such cases as in pediatric ward, where there is a danger
that the child user will play with the pump and unknowingly change the program.
Further more, in the case of the P-10 program, once locking the set programs, it will
remain in the pumps memory for the next use, even if the pump is switched off.
Locking and unlocking:
The NIKI lock out function disable all but the select key, while
the pump is operating. To lock out a program:
At any time during operation simultaneously press the arrow up
and arrow down. The display will show "Loc" accompanied
with a short beep.
To de-activate or exit lock-out function, simultaneously press
the arrow up and arrow down, the display will show Loc Off.
This option can only be activated while the pump is in operational state.
NOTE

Battery Operation

The NIKI V4 can operate on battery power, enabling operation when the patient is
being moved or during electrical power failure. When the pump runs on battery power,
the CHARGE indicator is off and the display flashes.
At full charge, the battery provides 16 hours of operation at an infusion rate of
125ml/hr.
When the pump is not in use, plug the pump's power cord to an AC wall outlet (If
possible) to retain battery charge. If the pump is out of service for a long period,
discharge (to prevent the NI-CAD memory effect) and recharge the battery
periodically (at least once a month - this will insure long battery life).
Important: Upon receipt, or following long periods of storage, it is necessary to wait
5 minutes after the pump been connected to the power supply before
operating on AC power.
NIKI V4 Operator's Manual 22
RATE-
-
VOL.-