DSC 3G2055 Installation Manual page 44

[202] Cellular Receiver 1 DNIS
Default (000000) Valid range: 000000 -
0FFFFF .
|____|____|____|____|____|____|
[203] Cellular Receiver 1 Address
Default (000.000.000.000). Valid range: 000-
255.
|____|____|____||____|____|____||____|____|____|____|____|____|
[204] Cellular Receiver 1 Port
Default (0BF5/3061) Valid range: 0000 - FFFF .
|____|____|____|____|
[205] Cellular Receiver 1 APN Default (
)
32 ASCII characters.
____________________________________
[206] Cellular Receiver 1 Domain
Name
Default ( )
i
Programming not permitted on UL/ULC listed system.
32 Character ASCII characters.
____________________________________
C R
ELLULAR ECEIVER
[211] Cellular Receiver 2 Account Code
Default (0000000000)
Valid range: 0000000001 - FFFFFFFFFE.
|____|____|____|____|____|____|____|____|____|____|
[212] Cellular Receiver 2 DNIS
Default (000000)
Valid range: 000000 - 0FFFFF .
|____|____|____|____|____|____|
[213] Cellular Receiver 2 Address
Default (000.000.000.000)
Valid segment range: 000-255
|____|____|____||____|____|____||____|____|____|____|____|____|
[214] Cellular Receiver 2 Port
Default (0BF5/3061) Valid range: 0000 - FFFF .
|____|____|____|____|
[215] Cellular Receiver 2 APN
Default ( ) 32 ASCII characters.
____________________________________
[216] Cellular Receiver 2 Domain
Name
Default ( )
i
Programming not permitted on UL/ULC listed system.
32 ASCII characters.
____________________________________
2 O
PTIONS
C O
ELLULAR
[221] Cellular Public Access Point
Name
Default ( ) 32 ASCII characters
____________________________________
[222] Cellular Login User Name
Default ( ) 32 ASCII characters.
____________________________________
[223] Cellular Login Password
Default ( ) 32 ASCII characters.
____________________________________
[224] Cellular Test Transmission Time
of Day
Default (9999) Valid range: 00 - 23 hrs. (HH) 00
- 59 min. (MM).|____|____|____|____
[225] Cellular Test Transmission Cycle
Default (000000)
Valid range: 000000 - 999999 minutes.
|____|____|____|____|____|____|
[226] Trouble Delay
Default (OFF)
Program 00 disable or FF enable.
|____|____|
[301] Command and Control Toggle
Options
|____| [1] Reserved Default ( )
|____| [2] Reserved Default ( )
|____| [3] SMS Command and Control Default
(ON).
|____| [4] Reserved Default ( )
|____| [5] SMS Character Format
|____| [6] Long SMS Message Handling
Default (OFF)
|____| [7] Reserved Default ( )
|____| [8] Reserved Default ( )
[308] SMS Retry Attempts
Default is 19 hex.
00 = Disabled
01-FE = 01-254 attempts
FF = Use Default value of 25 (19 hex)
44
PTIONS