Table of Contents
Advertisement
Each digit represents a status or trouble indicator (or assigned function when no trou-
ble is present) as described below:
1. Digit 1 - Signal Indicator 1, displays the presence/strength of signal 1.
2. Digit 2 - Signal Indicator 2, displays the presence/strength of signal 2.
3. Digit 3 - Network Indicator, displays the presence (operational status) of network.
4. Digit 4 & 5 – TROUBLE INDICATOR displays the type of problem/malfunction on
communicator or modules associated with and connected to communicator.
5. Digit 6 – Reserved for future use.
For example, status code 11002F – when interpreted means: "Signal Indicator 1 OK,
Signal indicator 2 OK, there is no network trouble, and there is trouble in the commu-
nicator, Panel supervision trouble. " For details see the table below:
Table 15: Communicator Status and Trouble Coding in Hexadecimal Numbers
Digit 1
Signal indicator 1
Signal indicator 2
0
Off
0
1
On
1
2
Flashing
2
The communicator status codes will indicate the signal levels with digit 1 and 2, a
network status with digit 3, and the trouble status with digit 4 and 5 as indicated in
table above. For example status code 11000F would display following status:
1 – On = Signal indicator 1, is ON
1 – On = Signal indicator 2, is ON
0 – OFF = Network indicator, network is working
00 – TROUBLE INDICATOR = there is no trouble on the communicator.
F – Future code not assigned yet. It is sixth hexadecimal digit. It could be also ' - '
(dash) instead of letter F (11000-).
In this example both signal indicators are on indicating that communicator has excel-
lent signal level; the network indicator is OFF showing that we do not have any net-
work problems and trouble indicators are both OFF indicating that we don't have any
trouble on the communicator.
[985] Radio Initialization Status
The radio initialization status is intended to provide the installer with real-time status
of radio communication. The radio initialization status is displayed in an 8 bit toggle
option. Each digit indicates one task in the radio initialization process as follows:
1. Radio power up
2. Received the SMS from C24
3. Radio reset
Digit 2
Digit 3
Network indica-
tor
Off
0
Off
On
1
On
Flashing
2
Flashing
Digit 4 & 5
TROUBLE INDICATOR
00
Off (No trouble)
01
Future use
02
Panel supervision trouble
03
Future use
04
Lockout trouble
05
3G/Cellular trouble
06
Ethernet Trouble
07
Receiver Not Available
08
Receiver Supervision trouble
09
FTC Trouble
0A
C24 Configuration SMS Failure
0B
Future use
0C
Module configuration Trouble
38
Digit 6
Future
use
F
F
F
F
F
F
F
F
F
F
F
F
F
Advertisement
Table of Contents
