DSC 3G2055 Installation Manual page 35

[623] Invalid Command
Default (Invalid Command);
This label will be included in the response message if the command was not
accepted as a valid SMS command.
[624] System Stay Armed
Default (Stay Armed);
This label will be included in the response to a status request command if a partition
is stay armed.
[625] System Away Armed
Default (Away Armed);
This label will be included in the response to a status request command if a partition
is away armed.
[626] System Night Armed
Default (Night Armed);
This label will be included in the response to a status request command if a partition
is night armed.
[627] System Disarmed Ready
Default (Disarmed Ready);
This label will be included in the response to a status request command if a partition
is disarmed and is ready to arm.
[628] System Disarmed Not Ready
Default (Disarmed Not Ready);
This label will be included in the response to a status request command if a partition
is disarmed and is not ready to arm.
[629] System is in Alarm
Default (is in Alarm);
This label will be included in the response to a status request command if a partition
is in alarm.
[630] Trouble Label
Default (Service is Required);
This label will be included in the response to the Alarm Memory command if there
are no alarms in memory.
[631] No Alarms in Memory
Default (No Alarm Memory);
This label will be included in the response to an Alarm Memory Request if there are
no alarms on the system.
[634] Error Code
Default (Error Code);
When an SMS initiated function fails, the module will send an error code to the tele-
phone number that was source of the
SMS request. Message format is: [Account Label] [Date and Time] [Error Code]
[Error Type]. Fields are "space" delimited.
35