Table of Contents
Advertisement
[622] Function Unsuccessful
Default (Unsuccessful);
Example: "stay armed unsuccessful. "
____________________________________
[623] Invalid Command
Default (Invalid Command);
Unprogrammable, enter correct command.
____________________________________
[624] System Stay Armed
Default (Stay Arm);
Included in the response message if the
command was not accepted as a valid SMS
command.
____________________________________
[625] System Away Armed
Default (Away Arm);
Included in the response to a status request
command if a partition is away armed.
____________________________________
[626] System Night Armed
Default (Night Arm);
Included in the response to a status request
command if a partition is night armed.
____________________________________
[627] System Disarmed Ready
Default (Disarmed Ready);
Included in the response to a status request
command if a partition is disarmed and is
ready to arm.
____________________________________
[628] System Disarmed Not Ready
Default (Disarmed Not Ready);
Included in the response to a status request
command if a partition is disarmed and is not
ready to arm.
____________________________________
[629] System is in Alarm
Default (Stay Arm);
This label will be included in the response to
an Alarm Memory Request if there are no
alarms on the system
____________________________________
[630] Trouble Label
Default (Service is Required);
Included in the response to the Alarm
Memory command if there are no alarms in
memory.
____________________________________
[631] No Alarms in Memory
Default (No Alarm Memory);
Included in the response to the Alarm
Memory command if there are no alarms on
the system.
____________________________________
[634] Error Code
Default (Error Code);
Included in the response to an Alarm Memory
Request if there are no alarms on the system
____________________________________
[901] Diagnostic Test Transmission
|___| [1] Ethernet 1 Default (OFF).
|___| [2] Ethernet 2 Default (OFF).
|___| [3] Cellular 1 Default (OFF).
|___| [4] Cellular 2 Default (OFF).
S
I
YSTEM
NFORMATION
O
)
NLY
[988] DNS 1 IP Address
|____|____|____||____|____|____||____|____|____|____|____|____|
[989] DNS 2 IP Address
|____|____|____||____|____|____||____|____|____|____|____|____|
[991] Firmware Version
|____|____|____|____|____|____|____|____|
[992] Ethernet IP Address
|____|____|____||____|____|____||____|____|____|____|____|____|
[993] Ethernet Gateway Address
|____|____|____||____|____|____||____|____|____|____|____|____|
[994] Cellular IP Address
|____|____|____||____|____|____||____|____|____|____|____|____|
[995] SIM Number
____________________________________
[996] Cellular Telephone Number
This number is required for DLS, and Firm-
ware upgrades.
____________________________________
[997] IMEI Number
____________________________________
[998] MAC Address
|____|____|____|____|____|____|
|____|____|____|____|____|____|
S
R
YSTEM
ESET
[999] Software Default
Default (99); Valid entries are 00 or 55
|____|____|
46
(R
EAD
D
EFAULTS
Advertisement
Table of Contents
